Loading...
Image Image

The company Vista Logistics d.o.o. is an agent for the mobile floor systems of the companies DOLDterra and Z.G.S. Mobile Straßen for the Republic of Croatia, the Republic of Slovenia, Bosnia and Herzegovina, the Republic of Serbia, the Republic of Montenegro and the Republic of North Macedonia.

The companies DOLDterra and Z.G.S. Mobile Straßen are part of the Fomacon Group.

Mobile floor systems are becoming an important part of equipment when a certain surface needs to be protected when doing some work. They therefore have widespread application.

We can advise you on how to best exploit the existing soil conditions to prevent project delays or additional costs. We support you in the achievement of your goals in terms of occupational health and safety, avoidance of environmental damage, and time and project cost savings.

Mobile floor systems can be used in:

  • Building construction and engineering
  • Earth works
  • Floors for outdoor events
  • Temporary access roads
  • Mobile sports floors
  • Floors for tents or storage areas
  • Construction of parking lots
  • Protection of grass surfaces
  • Walkways and promenades
  • Transport of heavy load over different types of surfaces and for other needs as surface protection

varioMAT 1

VarioMAT 1 is the ideal solution for mobile roads, access roads to construction sites and event floors. It is also ideal for supplementing and widening existing paths and roads, as well as for storage areas, work platforms and, for example, helicopter landing pads. Its low weight means that it can easily be installed by hand too. This feature means that two people can install up to 400 varioMAT 1 per day. The floor protection panels are laid on the subfloor and screwed down. Due to their low weight and size, they can be laid and mounted by hand without any problems. The profiling provides a non-slip surface for pedestrians, cyclists as well as cars and trucks. Depending on the condition of the ground, a PE foil, geotextile or rubber mat is also used as an underlay. The panel is extremely flexible and elastic, adapts perfectly to the respective underground and protects sensitive surfaces at the same time.

Image

Material:

Polyethylene, high molecular weight

Measurements:

1200 mm x 2000 mm x 14.5 mm (incl. profile)

Weight:  

Approx. 30 kg

Surface:

2.5 mm one-sided profile

Color:

Black and multi-colored

Load capacity:

Up to 60 t (depending on substrate)

 

Image
Image
Image
Image
Image
Image

varioMAT 1+

VarioMAT 1+ This type of panel is used for access roadways and pedestrian walkways, tent floors, exhibition space, supply roads or work platforms. Depending on the texture of the floor, the panels can also be used as a temporary access road or parking lot for vehicles with up to two tonnes of wheel load. The floor protection panels offer optimum protection as a transport route or as a base for stage assemblies, great events and sport events as lawn coverings.

The floor protection panels are laid onto the ground and screwed down. Due to their low weight and size, they can be laid and mounted by hand without any problems. The profiling provides a non-slip surface for pedestrians, wheelchair users, cyclists as well as cars and trucks. Depending on the condition of the floor, a PE foil, geotextile or rubber mat is also used as a base. For additional security during the night, signal markings and cat‘s eyes can be integrated into the panel elements on request. The VARIOmat 1+ panel is extremely flexible and elastic, adapts perfectly to the respective underground and protects sensitive surfaces at the same time.

 

Image

Material:

Polyethylene, high molecular weight

Measurements:

1200 mm x 2400 mm x 14,5 mm (incl. profile)

Weight:  

Approx. 30 kg

Surface:

2,5 mm one-sided profile

Color:

Black and multi-colored

Load capacity:

Up to 60 t (depending on substrate)

 

Image
Image
Image
Image
Image
Image

varioMAT 2

VarioMAT 2 is a floor protection panel that can be laid by hand and can sustain maximum load of up to 130 tonnes. It is suitable for the construction of temporary construction roads, crane routes, temporary sidewalks, for concerts, events and many other applications.

The newly designed profile with standardised ruts is suitable for driving over with a pallet truck or wheelbarrow. The varioMAT 2 is ideal for use on small construction sites, up to heavy- duty use of tracked vehicles and heavy construction machinery. Thus it offers application possibilities for events, construction and infrastructure. Two people can lay up to 60 varioMat 2 per hour without any additional aids.

 

Image

Material:

Polyethylene, high molecular weight

Measurements:

1000 mm x 2000 mm x 31,5 mm (incl. profile)

Weight:  

Approx. 40.5 kg

Surface:

5 mm and 2.5 mm profile

Color:

Black and multi-colored

Load capacity:

130 t (depending on substrate)

 

Image
Image
Image
Image
Image
Image

varioMAT 3

VarioMAT 3 floor protection panels are used on even surfaces and ensure optimum load distribution. They are suitable as mobile construction roads, construction site access roadways, widening of paths or storage areas as well as crane and assembly platforms on construction sites and line construction. Underlaid with special mats, varioMAT 3 floor protection panels are also used to protect sensitive surfaces such as natural or concrete paving stones or on tartan tracks in stadiums.

The floor protection panels are bolted together to create a firmly connected roadway, mobile construction road or working platform for heavy loads and vehicles. The floor protection panels can be used in a variety of ways due to the different profiles on both sides. The flat profile on one side is particularly suitable for pedestrians, cyclists and wheelchair users as well as for cars. The strong profiling on the other hand ensures optimum traction of heavy vehicles. The VarioMAT 3 floor protection panels are laid from the crane truck and guarantee a safe access from the start of the assembly.

 

Image

Material:

Polyethylene, high molecular weight

Measurements:

2000 mm x 3000 mm x 45,5 mm (incl. profile)

Weight:  

Approx. 221 kg

Surface:

5 mm and 2.5 mm profile

Color:

Black and multi-colored

Load capacity:

150 t (depending on substrate)

 

    
Image
Image
Image
Image

varioMAT F

VarioMAT F is a new innovation for heavy-duty industry. It is suitable for vehicles with an axis load of up to 12 tonnes, making it an ideal product for civil engineering, for the construction of access roads and working platforms on uneven ground. Light profiling provides the required traction.

The floor protection panels are bolted together, creating a permanently connected roadway, mobile site road or working platform for heavy loads and vehicles both in length and width. Due to different profiling on the panels, the floor protection panels can be used in many ways. The panel is particularly suitable for pedestrians, cyclists, cars as well as construction vehicles. The panels ensure optimum traction of heavy vehicles. The panels are laid from a crane truck or with a forklift truck and ensure safe access from the start of assembly.

 

Image

Material:

Polyethylene, high molecular weight

Measurements:

2400 mm x 3000 mm x 30 mm (incl. profile)

Weight:  

Approx. 200 kg

Surface:

2.5 mm one-sided profile

Color:

Black and multi-colored

Load capacity:

130 t (depending on substrate)

 

Image
Image
Image
Image

varioMAT TT

TT panels are used on even surfaces and ensure optimum load distribution. They are suitable for access to construction sites, widening of roadways or storage areas as well as crane and assembly platforms on construction sites.

Underlaid with special mats, TT panels are also used for the protection of sensitive surfaces, such as natural or concrete paving or on tartan tracks in stadiums.

TT panels are bolted together, which results in a firmly connected roadway or working platform for safe loads and vehicles. Due to different profiles on both sides, TT panels can be used in many different ways. The prolongation on one side is particularly suitable for pedestrians, cyclists and wheelchair users as well as for cars. The strong profiling on the other hand ensures optimal traction of heavy vehicles even in difficult terrain. TT panels are moved from the crane truck and ensure safe access from the start of the assembly process.

 

Image

Material:

Polyethylene, high molecular weight

Measurements:

3000 mm x 2500 mm x 38 mm (incl. profile)

Weight:  

Approx. 295 kg

Surface:

5 mm and 2.5 mm profiles

Color:

Black and multi-colored

Load capacity:

180 t (depending on substrate)

 

    
Image
Image
Image
Image
Image
Image

varioMAT 4

With its dimensions of 4 metres wide, the mat is the ideal solution for the heavy-duty industry when it comes to pipeline construction, wind farms and heavy-duty transport. The innovative overlapping connection system results in maximum stability and load-bearing capacity.

The floor protection panels are connected to each other (Camlog system), which creates a fixed roadway, mobile site road or working platform for heavy loads and vehicles. The bearing capacity of the subsoil is considerably optimised, soil compaction is minimised and damage to the ground is avoided. Due to different profiling on the panels, the floor protection panels can be used in many ways. The panel is particularly suitable for different types of heavy-duty vehicles. The panels ensure optimum traction of heavy vehicles even in difficult terrain. The panels are laid from a crane truck or with a forklift truck and ensure safe access from the start of assembly.

 

Image

Material:

Polyethylene, high molecular weight

Measurements:

2110 mm x 4110 mm x 52,5 mm (incl. profile)

Weight:  

Approx. 354 kg

Surface:

5 mm and 2.5 mm profiles

Color:

Black and multi-colored

Load capacity:

260 t (depending on substrate)

 

Image
Image
Image
Image
Image

Remopla/ PROmat 1

Remopla panels are suitable for fast and safe attachment of paths, access roads and places on even ground. Remopla panels can also be used as a substructure for stages, as temporary walkways, even with high pedestrian traffic. Remopla panels are robust, very resilient and therefore ideal for use on meadows, gravel and cobblestones. The surface area of the Remopla panels ensures slip resistance.

The Remopla system consists of interconnectable panels made of recycled PVC with UV stabilizers. The profiled surface provides a perfect hold. The Remopla panels, which weigh only 10.2 kg, can be laid by hand by one person with ease and joined together without the use of tools.

 

Image

Material:

Recycling PVC

Measurements:

1200 mm x 800 mm x 43 mm (incl. profile)

Weight:  

Approx. 32 kg

Surface:

2 mm one-sided profile

Color:

Black and multi-colored

Load capacity:

7.5 t (depending on substrate)

 

Image
Image
Image
Image
Image
Image

Systema

Systema floor protection panels can be assembled and dismantled quickly and easily with just a few simple steps. They are used not only for floor protection, but also as tent flooring, exhibition space, mobile dance floor or stage substructure. Systema is also a popular product as a temporary access solution. Systema floor protection panels are characterised by their high load capacity and uncomplicated handling during installation.

Solid plug connections and the offset laying technique guarantee a secure position on any surface at all times. The Systema floor protection panels can be installed quickly and efficiently by just one person without the need for machines or special tools. With additional drive-on ramps that can be attached, it is easy to drive on and walk on without stumbling.

Image

Material:

Polyethylene

Measurements:

492mm x 492mm x 34mm (incl. profile)

Weight:  

1,48 kg

Surface:

 

Color:

Grey, light grey, dark grey, red, marble and black

Load capacity:

Approx. 2 t (depending on substrate)

 

Image
Image
Image
Image
Image
Image
Image

Panel racks

The panel racks are flexible storage systems. They are used for commissioning and shipping. The advantages are easy handling and optimal use of space as well as space-saving folding for empties transportation. The panel racks are made of high-quality sheet steel, which makes them highly resilient and extremely durable.

Our standard sizes:
Currently we offer the post pallets only for the listed products, other products and sizes on request.

Outer dimensions: 1220 x 2430 x 680 mm
Inner dimensions: 1200 x 2410 x 500 mm

Compatible with the respective products: eMAT Panel

Image
Image
Image
Image

eMAT Connector

2-way and 4-way standard connectors

The eMAT floor panels 2-way and 4-way connectors are made of 100% urethane. These are inserted from below and fastened with four M10 screws. For projects where heavy vehicles or machines are used, or on uneven surfaces, the connectors can be reinforced with a metal tape.

2-way and 4-way connectors metal version

Image
Image
Image
Image

Quick connector

Quick connectors are used for short-term projects where quick installation is important. The quick connector is simply pressed under the mats into the holes.

Image
Image
Image
Image

tMAT / TT-Panel connector

Metal connector

The metal connectors are used to screw the tMAT or TT-Panels together. This results in a firmly connected roadway, mobile construction road or working platform for heavy loads and vehicles, both in length and width.

Image
Image
Image
Image

CONTACT US

Vista Logistics d.o.o.

Ulica grada Chicaga 2B
Zagreb, HR
OIB: 85442278787
Tel: +385 1 48 50 154
Mob: +385 99 35 67 000
Mob: +385 99 37 33 896
Email: info@vistalogistics.hr